We can configure Smart Smoke Detector, Alarm and Notification through its settings page.
Device Menu -> Settings
This setting page is used to configure system-level settings for Smart Smoke Detector.
Device is using multiple sources like, NTP (Network Time Protocol), UseMyTools Time API to synchronize its clock machine. We easily update and run device time synchronization through time Update button.
Device can easily be rebooted using REBOOT button.
Note: It is recommended to reboot this tiny device once in few days.
Device License can easily be update under Device License section.
Note: System will verify device license and then enable its configuration accordingly. Device will auto reboot upon license update. Therefore, device is inaccessible for few seconds.
Once Device License is updated. Its information can been seen under Device ID section.
Device Access Point Name
This setting will show device Access Point SSID that can been seen during Hotspot or configuration mode.
Device Access Point AP Password
This setting will show device access point (AP) password that can used to connect with its Hotspot or during configuration mode.
We can change device access point (AP) password by entering new password and then click update.
Device Reset Internet Settings
Device Internet Settings can be reset by using button. In this way, device will erase its last known Access Point Name and Password and enable its Hotspot to reconfigure the device network connection. This setting is useful to change device network or update existing new network credentials.
Device Wi-Fi Hotspot
This setting is used to enable/disable device wifi hotspot mode. Simply change the Wi-Fi Hotspot mode and then update it.
Use Device RTC
This settings is used to enable/disable to use device real-time clock (RTC) in wifi mode.
This setting is used to set Device Name. Enter new device name and then update it. Device Name is useful during Notification and tag your device with easy to remember name.
This setting is used to enable/disable to send mobile notification from the device.
Device Notification Test
This setting is used to test mobile notification from the device. Make sure Device Notification is enabled before performing this test.
Device IoT Integration
This setting is used to enable/disable IoT (internet of things) Home Automation to control device from anywhere through internet.